TYPE VII-C –U-BOAT KIT
1/32 Scale 82.5” x 7.5” x 6”
and contents List for kit continued:
detailed 88mm deck cannon SKC35 on LC35 mount
1 x 20mm MGC30 A.A. Gun on LC30 mount.
1 x Anchor
Main diagram plan sheet (half scale size ) showing elevation of boat, and
deck plan layout. Full size 1/32nd scale Conning Tower showing both Port /
Starboard sides. Building templates for location of stern gear, and rudders.
and contents List for kit:
1 x HULL
1 x DECK & 1 TOWER photo etched in .020 brass
2 x rudders, 2 x stern planes, 2 x fore planes.
2 x scale brass alloy props.
P/SB front plane guards
1 x Lower Skeg Keel Protector
1 x Stern Plane Guard & 1x Outer bearing assembly.
2 x Prop Shafts 4mm diam, threaded at prop end 4mm.
2 x Front Plane bearing bushes.
2 x Stern Plane bearing bushes.
2 x Rudder Post bearing bushes.
2 x Large Closed deck fairleads.
2 x Periscopes.
1 x Periscope mounting pedestal.
1 x U.Z.O. mount with aiming sight.
1 x R.D.F. Loop aerial.
2 x Open small fairleads.
1 x K.D.B. Hammer
3 x Hatches, one with wheel for tower.
Running Hardware available for this Sub - $ 500.00